MITSUBISHI FX3G-40MT/DS USER'S MANUAL (Positioning Control Edition) PDF

Power: 3.7kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity FX3G-40MT/DS PDF.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor FX3G-40MT/DS)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Total points: 14 points.
Input points: 8 points FX3G-40MT/DS PDF.
Output points: 6 points.
Voltage: AC220V.
Output type: relay.
Outline dimension: 90*75*90.
FX1N series is a very powerful micro PLC,
Can be extended to up to 128 I/O points,
And can increase the special function module or the expansion board.
Communication and data link function options make FX1N in the volume, communication and special function modules and other important applications is very perfect FX3G-40MT/DS PDF. Max input / output points: 16 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 8 points.
Output type: Transistor (sink).
Power consumption: 6W.
Weight (kg):0 MITSUBISHI USER'S MANUAL. 2.
Size (WxHxD) mm:35x90x87.
Taking into account space saving and processing speed.
Connector input and output type compact high performance universal machine.

Compact, scalable input / output FX3G-40MT/DS Manual.
Can connect analog quantity, communication, positioning, etc..
Rich special extension equipment for FX2N MITSUBISHI USER'S MANUAL.
By connecting the compact FX2rvc series with the input and output expansion module.
The input and output can be extended to 256 points.
Built in 8000 step RAM memory.
By installing the memory card box, the maximum can be extended to the 16000 step.
Overseas oriented products meet all kinds of international standards MITSUBISHI USER'S MANUAL.
Use terminal module to replace connector connection or relay terminal row connection,
So as to save the wiring inside the cabinet. MITSUBISHI inverter FR-D740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 0.75KW.
The internal and back of the inverter structure considering the cooling effect, the relationship between the upper and lower ventilation is also important,
Therefore, in order for the type of unit, hanging on the wall to the vertical position, the installation of vertical as possible.
Transducer can be used to drive a single phase motor? Can single phase power supply be used?
Basically can not be used FX3G-40MT/DS USER'S MANUAL. For a single phase motor with governor switch, the auxiliary winding will be burnt when the speed is below the operating point;
For the capacitor start or capacitor operation mode, the capacitor explosion will be induced FX3G-40MT/DS Manual.
The inverter power supply is usually 3, but the capacity for small, single-phase power is also useful functioning aircraft.