MITSUBISHI FX3U-16MT/ESS USER'S MANUAL (Hardware Edition) PDF

Convert connectors to fast connectors.
According to the location of the connection equipment distribution module. Power: 55kw.
Voltage: 200V.
The power factor of the input power factor is up to 0 FX3U-16MT/ESS PDF. 99 and above (100% load).
Can be connected to multiple inverters, to achieve a common DC bus mode.
Equipped with standard power retrogradation function. Apply PLC:FX2N (up to 3 units), FX3U (up to 3 units) FX3U-16MT/ESS
Applicable PLC:FX2NC (to FX2NC-CNV-IF, up to 1 units), FX3UC (to FX2NC-CNV-IF or FX3UC-1PS-5V, up to 3 units).
The rotation angle detecting unit is controlled by the mechanical cam switch,
The rotation angle is detected by using the special detector, and the rotation position control with high precision is realized FX3U-16MT/ESS PDF FX3U-16MT/ESS Manual.
Using the setting unit, it is easy to realize the setting and monitoring of the action resolution.
The detection of rotation angle can be accurate to the high accuracy of 415rpm/0 FX3U-16MT/ESS PDF. 5 degree or 830rpm/1.0 degree unit.
Built without battery to maintain the EEPROM, the maximum can store 8 kinds of procedures.
The cable that is assembled in the device without the brush can be extended to 100m.
When used alone, the CC-LINK type FX2N-32CCL interface module can be used to connect to the CC-LINK system MITSUBISHI USER'S MANUAL.
Product composition:
FX2N-1RM: the main body of programmable cam switch (with setting panel).
F2-720RSV: no brush splitter.
FX2N-RS-5CAB: splitter cable (5m).
PLC connecting cable (55mm). The operation, monitoring, parameter modification and other operations can be carried out by computer or PLC MITSUBISHI USER'S MANUAL. Convert connector to screw relay terminal.
The action of the signal of the conversion module is shown in the light of the lamp.
Negative common end with display. Power: 1 FX3U-16MT/ESS USER'S MANUAL. 5kw.
Voltage: 200V.
Purpose: high frequency braking resistor.
The braking ability provided by the braking capacity is larger than that provided by the external braking resistor MITSUBISHI USER'S MANUAL.
Can also be connectedd without built-in brake transistor inverter FX3U-16MT/ESS Manual.
Three types of discharge resistors are available.
Please select according to the required braking torque.