MITSUBISHI GT1175-VNBA-C User's Manual PDF

For the GT1575-STB.
Applicable model: GT15. Cable length: 3.0m.
For QnA/ACPU/ motion controller CPU (A series, extended basis system) and the connection between A7GT-CNB GT1175-VNBA-C PDF.
Applicable models: GT16, GT15, GT11. Protective film for 15 inch screen.
Transparent (frame: white), 5.
Applicable model: GT15. For external input / output devices and operation panel (negative public transport / source output) GT1175-VNBA-C
Applicable models: GT16, GT15, GT27, GT25. Protective film for 4.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT104. For the GT1562-VNB.
Applicable model: GT15. 48MB extended memory.
Applicable model: GT15 GT1175-VNBA-C PDF. 12.1 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. Cable length: 5m.
The connection between an external monitor, a personal computer, and a visual sensor and a GOT GT1175-VNBA-C PDF.
Applicable models: GT16, GT15, GT27. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 15 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: XGA (1024 x 768) MITSUBISHI User's Manual.
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities) MITSUBISHI User's Manuual GT1175-VNBA-C Manual .
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed MITSUBISHI User's Manual.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use ddry cloth touch screen on the surface of the water GT1175-VNBA-C User's Manual.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT1175-VNBA-C Manual .