OMRON E5EN-HSS2HH03BD-FLK User's Manual (Communications Functions) PDF

Size: DIN 1/8, 48 x 96 x 60mm.
Power supply voltage: AC100 ~ 240V.
Input type: thermocouple.
Alarm points: 1 points.
Control output: voltage output (for driving SSR) E5EN-HSS2HH03BD-FLK PDF.
Simple new temperature controller, easy to achieve temperature control.
Good visibility (character height E5CSL:21.7mm, E5CWL:16.2mm (PV), E5EWL:20mm (PV)).
From the front panel depth: 60mm.
Parameter is less, set simple E5EN-HSS2HH03BD-FLK
Sampling time was reduced to 250ms. Case color: Black.
Control output: Voltage output (for driving SSR).
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 2.
Detection of heater burnout, SSR failure, and heater overcurrent: -- E5EN-HSS2HH03BD-FLK PDF.
No. of event inputs: --.
Transfer output *2: -- E5EN-HSS2HH03BD-FLK MANUAL.
Communi cations: RS-485.
Previous model: Thermocouple input, --;
Resistance thermometer input, --.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function E5EN-HSS2HH03BD-FLK PDF.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks OMRON User's Manual.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter OMRON User's Manual.
Switch the PV display between three colors.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs. 2M E3Z-L61-ECON fine beam
Reflective typeSeensing method: Reflective model(for mark detection) OMRON User's Manual E5EN-HSS2HH03BD-FLK User's Manual.
Connection method: Pre-wired (2 m).
Sensing distance: 70±10 mm.
Extremely thin beam ideal for detection of minute objects and marks.
Ideal for ddetection of small objects and slight color differences E5EN-HSS2HH03BD-FLK MANUAL.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences.