OMRON E5CC-CX2DSM-800 User's Manual PDF

Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 61 (75).
Output configuration: NPN E5CC-CX2DSM-800 PDF.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated E5CC-CX2DSM-800
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Unshielded, M12.
Sensing distance: 12 mm E5CC-CX2DSM-800 PDF.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. E3T-SR12 detection methods: Regression reflection type,
Connection mode: lead wire,
Output status: shading ON,
Output mode: NPN output,
Long distance photoelectric sensor to realize the regression reflection
Type 10m distance settting 2mName: HFU with Programless Communications *1 E5CC-CX2DSM-800 PDF E5CC-CX2DSM-800 Manual.
Power supply voltage: 24 VDC supplied from the End Unit OMRON User's Manual.
No. of control points: None.
Control outputs 1 and 2: None.
Control outputs 3 and 4: None.
Auxiliary output: Transistor output: 4 points (sinking).
Functions: burnout Heater alarm, None; Event inputs, 4.
Communications functions: Port C: RS-485 or RS-232C selectable.
From End Unit: Port A: RS-485 OMRON User's Manual.
Input type: No input.
Terminal: Screw-less clamp.
In-panel Temperature Controller with Flexible,
Modular Design and Wide Integration with Host,
Devices.
The compact modular structure enables construction of temperature,
systems optimally suited to the application.
Connection can be made to a Programmable Controller without any,
programming required, reducing the number of steps required in ladder,
programming design OMRON User's Manual.
One fully universal-input Unit includes a thermocouple, platinum-resistance,
thermometer, and analog input for easy selection and reduced inventory,
requirements.
Connect directly to the G3ZZA Multi-channel Power Controller using,
optimum cycle control for high-accuracy regulation with minimal noise E5CC-CX2DSM-800 User's Manual.
Autotuning (AT) can be used for independent heating/cooling PID control.
Self-tuning (ST) can be used to calcullate the PID constants with the step,
response method E5CC-CX2DSM-800 Manual.
Up to 16 Temperature Controllers can be connected to a single DeviceNet,
Communications Unit.