OMRON E5CZ-R2MTD User's Manual PDF

E3JK-DS30S3 detection method: diffuse reflection type,
Connection mode: lead wire,
Detection range: 300mm.
Output state: when the light into the ON; light shading ON E5CZ-R2MTD PDF.
Output: DC no contact,
2 types of cost reductionCase color: Black.
Control output: Current output.
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 1.
Detection of heater burnout, SSR failure, and heater overcurrent: -- E5CZ-R2MTD
No. of event inputs: --.
Transfer output *2: Transfer output using control output.
Communi cations: RS-485.
Previous model: Thermocouple input, --;
Resistance thermometer input, -- E5CZ-R2MTD PDF.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0 E5CZ-R2MTD PDF. 2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV OMRON User's Manual.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
SSwitch the PV display between three colors E5CZ-R2MTD Manual.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs OMRON User's Manual. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: NPN.
Action mode: NC. Detection methods: the firing pattern OMRON User's Manual.
Detection range: 500mm.
Purpose: small,
Small thin space probe;
Interference prevention function with close installationType: high temperature.
Measuring temperature range: 0 ~ +1000.
The target size: 40mm diameter (from 500mm).
No need to contact the workpiece, you can measure the temperature.
Achieve no damage, health and efficient temperature management.
A small spot diameter 3mm and 8mm diameter two types.
Reproduction of positive and negative 0.5 degrees Celsius, response speed of 0.4 seconds,
(95%) with high precision and high speed measurement.
In addition to the originnal middle temperature (0 ~ +500 C),
Also added in low temperature (- 50 DEG C ~ +500),
High temperature (0 ~ +1000 degrees C) models E5CZ-R2MTD User's Manual.
New measurement distance up to 500mm, 1000mm long distance type.
Use another programmer, can chaange the temperature monitoring, radiation rate,
Moving average function and output range E5CZ-R2MTD Manual.
(picture for the installation of programmer in the ES1 body)