Proface CA1-RCVLRG-01 User's Manual PDF

Slave station module for connecting support for CANopenFitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA1-RCVLRG-01 PDF. For 5.7 inch models, for fixing the hooks of the three EX modules.Suitable for A/B+ Type modelsFor 5 CA1-RCVLRG-017 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.A connector that connects the DIO interface for connecting an external I/O device (5 sets).Adapter for EX module (5 / sett)COM2 terminal adapter for communication through the RS-422/485 connection15 inches, GP installed to the hard panel to provide dust and moisture proof function CA1-RCVLRG-01 PDF CA1-RCVLRG-01 Manual. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication CA1-RCVLRG-01 PDF. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).10.4 inches and above, used to connect the power cord (5 / set) Proface User's Manual. USB cable to prevent disconnection of the fastening clip (5 / set)For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface User's Manual. COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the mann-machine interface CA1-RCVLRG-01 User's Manual. 10.4 inches (TFT), the replacement of the host backlight (1).Used to convert the USB interface to the serial interface (RS-232C) Proface User's Manual. A modem or bar code reader that can be connected to suppport RS-232C CA1-RCVLRG-01 Manual. Suitable for GLC2300 seriesFor 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)