Proface CA1-STDLRG-01 User's Manual PDF

12.1 inches, replaced by a host of backlight (1).COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Adapter for EX module (5 / set)USB cable clamp for preventing disconnection of connection (5 / set)A connector that connects the DIO interface for connecting an external I/O device (5 sets) CA1-STDLRG-01 PDF. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceUsed to convert RGB to DVI-A5 CA1-STDLRG-017 inches, GP installed to the hard panel to provide dust and moisture proof function CA1-STDLRG-01 PDF. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviiceNet master station15 inches, replaced by a host of backlight (1) CA1-STDLRG-01 Manual. 10.4 inches (TFT), the replacement of the host backlight (1).10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function CA1-STDLRG-01 PDF. Suitable for A/B+ Type modelsMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories Proface User's Manual. COM1 interface with the cable for direct connection to the CPU series PLC QExpansion module for the GP3000 access to the CANopen network and communication with the CANopen master station1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface User's Manual. Used in a variety of host and man-machine interface for RS-232C connection512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash meemory card CA1-STDLRG-01 User's Manual. Use external output for the GP3000 series of auxiliary connectors (5 / sets) Proface User's Manual. Engineering documents created by the LT interface to download images and logic programming software through the USB iinterface CA1-STDLRG-01 Manual. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).