Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.15 inches, replaced by a host of backlight (1).Used in a variety of host and man-machine interface for RS-422 connectionCOM2 adapter for converting the COM2 interface to the RS-422 terminal block10 CA1-WMALRG-01 PDF. 4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set)
CA1-WMALRG-01USB cable clamp for preventing disconnection of connection (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)10.4 inch TFT models applicable parts, for the 10 CA1-WMALRG-01 PDF. 4 inch man machine interface (TTFT) into the 10 CA1-WMALRG-01 Manual. 4 inch GP2500 (TFT) in the installation of the required accessories.For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices CA1-WMALRG-01 PDF. (5 / set)Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationSuitable for GLC2300 series128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface User's Manual. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)COM1 interface with the cable for direct connection to the CPU series PLC ACOM1 interface with the cable for direct connection to the CPU series PLC QFitting on NETWORK FLEX interface Proface User's Manual. Connecting NETWORK FLEX communication cable. (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or otherr host)For the operation screen (5 pieces) (GP3000H standard) CA1-WMALRG-01 User's Manual. 15 inches, GP installed to the hard panel to provide dust and moisture proof function Proface User's Manual. Used to convert the USB interface to the serial interfacee (RS-232C) CA1-WMALRG-01 Manual. A modem or bar code reader that can be connected to support RS-232C.13 pin input connectors for HTB and 16 pin output connectors. (1 / set)