Extended cable for connecting USB (Type-A) (LT) interface.The main controller is connected to the man-machine interface for MPI communicationFor 5.7 inch models, for the 5 CA3-ISO485-01 PDF. 7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Extension cable for connecting USB (Type-A) interface to front panel.512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card
CA3-ISO485-01COM2 terminal adapter for communication through the RS-422/485 connectionMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA3-ISO485-01 PDF. Disposable film (5 sheets / sets)) for protecting screen against contamination of human computer interface5 CA3-ISO485-01 Manual. 7 inches, GP installed to the hard panel to provide dust and moisture proof function.256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA3-ISO485-01 PDF. 10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationUsed in a variety of host and man-machine interface for RS-232C connection5 Proface User's Manual. 7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Use external output for the GP3000 series of auxiliary connectors (5 / sets) Proface User's Manual. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Engineering documents creeated by the LT interface to download images and logic programming software through the USB interface Proface User's Manual CA3-ISO485-01 User's Manual. 12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof ffunction CA3-ISO485-01 Manual. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)