Proface CA4-ATM10-01 User's Manual PDF

Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.The main controller is connected to the man-machine interface for MPI communicationProtection for GP rear connectors (large and small for each of the 1) CA4-ATM10-01 PDF. A connector that connects the DIO interface for connecting an external I/O device (5 sets).Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)For 5 CA4-ATM10-017 inch models, prevent cable loose from the USB cable fastening clip (5 / set).10.4 inches (TFT), the replacement of the host backlight (1).For the operation screen (5 pieces) (GP3000H standdard) CA4-ATM10-01 PDF CA4-ATM10-01 Manual. Used to connect the SIEMENS S5 PLC series to the host computer interface10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets) CA4-ATM10-01 PDF. Touch panel operation for RGB input modules (Master - from: Mini-B)For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable Proface User's Manual. (5 / set)12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface User's Manual. 256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory cardd CA4-ATM10-01 User's Manual. COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)10 Proface User's Manual. 4 inches (TFT), the replacement of the host backlight (1).COM2 terminal adapter for coommunication through the RS-422/485 connection10 CA4-ATM10-01 Manual. 4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.