Proface CA7-HTBCNSET-01 User's Manual PDF

12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA7-HTBCNSET-01 PDF. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2For RGB input USB cable to prevent disconnection (2 / set)Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA7-HTBCNSET-01 PDF CA7-HTBCNSET-01 Adapter for EX module (5 / sett)A connector that connects the DIO interface for connecting an external I/O device (5 sets) CA7-HTBCNSET-01 Manual. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Used in a variety of host and man-machine interface for RS-422 connectionExpansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module CA7-HTBCNSET-01 PDF Proface User's Manual. Used to convert RGB to DVI-ASlave station module for connecting support for CANopen12.1 inches, replaced by a host of backlight (1).5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) Proface User's Manual. The main controller is connected to the man-machine interface for MPI communication15 inches, replaced by a host of backlight (1).For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).COM1 interface with the cable for direct connection to the CPU series PLC QUSB cable clamp ffor preventing disconnection of connection (5 / set)Used in a variety of host and man-machine interface for RS-232C connection10 Proface User's Manual CA7-HTBCNSET-01 User's Manual. 4 inches and above, used to connect the power cord (5 / set).COM1 pin adappter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface CA7-HTBCNSET-01 Manual.