Size: 45 × 35 mm.
Type: Plug-in.
Control method: ON/OFF operation.
Control output: Relay.
Power supply voltage: 100 to 240 VAC.
Ideal for Simple Built-in Control.
A high switching capacity of 10 A at 250 VAC enables,
direct load switching.
A sensor is provided to enable immediate application .
Sockets with finger protection (PTF14A-E) or without,
finger protection (PTF14A) can be used E52-P20C D=6.4.
Simple operation and settings
E52-P20C D=6.4 Even simpler with digital models. Power supply voltage: 5 to 12 VDC.
Output configuration: Open-collector output.
Resolution (divisions): 256 (8-bit).
Connector for H8PS Cam Positioner: None.
General-purpose Absolute Encoder E52-P20C D=6.4.
with External Diameter of 50 mm.
Absolute model .
External diameter of 50 mm.
Resolution: 256 (8-bit).
Lightweight construction using plastic body. Release key type: Special release key.
Indicator: Green.
Lock and release types: Solenoid lock Mechanical release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+2NC/1NO.
Conduit opening: G1/2 E52-P20C D=6.4.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns .
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection. Supply voltage: 100 to 240 VAC.
6-digit time counter: Light gray.
DIN 48 x 24-mm Total Counter/Time Counter,
with Easy-to-read Displays and Water and,
Oil Resistance Equivalent to IP66.
High-visibility, negative transmissive LCD display with 8.5-mmhigh characters and, built-in red LED backlight at low power.
consumption.
IP66 with oil resistance and NEMA 4 protection achieved by,
unifyingg the front with the ccase and by using oil-resistant parts,
and materials E52-P20C D=6.4.
Compact (80 mm) body.
Just change a switch setting for either an NPN or PNP input.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents eleecttrical shock,
and conforms to VDE0106, Part 100 E52-P20C D=6.4.
Certified for UL and CSA safety standards.
Complies with EMC standards (EN 61326) and CE Marking.
E52-P20C D=6.4 Operation manual / Instructions / Catalog download link:
/searchDownload.html?Search=E52-P20C D=6.4&select=5