MITSUBISHI F930GOT-BBD-K-E Installation Manual PDF

Output points: 2 points.
Output form: transistor output.
Weight: 0.02kg.
Function expansion board is used in the FX3SA, FX3S, FX3GA, FX3G, FX3GE on the small number of input and output extension of the product,
Can be built into PLC F930GOT-BBD-K-E PDF. Max input / output points: 80 points.
Power supply voltage: 24VDC.
Input points: 40 points.
Output points: 40 points.
Output type: relay.
Power consumption: 40W F930GOT-BBD-K-E
Weight (kg):1.2.
Size (WxHxD) mm:285x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time F930GOT-BBD-K-E PDF.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following feattures: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications F930GOT-BBD-K-E PDF MITSUBISHI Installation Manual F930GOT-BBD-K-E Manual .
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules MITSUBISHI Installation Manual.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable MITSUBISHI Installation Manual. Power: 37kw.
Voltage: 400V.
There are 100% braking torque output in continnuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control F930GOT-BBD-K-E Installation Manual.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space annd reduce the comprehensive cost F930GOT-BBD-K-E Manual .
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving.