MITSUBISHI FR-A842-08660-2-60 Programming Manual (PLC FUNCTION) PDF

Power: 0.4kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity FR-A842-08660-2-60 PDF.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor FR-A842-08660-2-60)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) MITSUBISHI inverter FR-E720 series.
Voltage level: 3 phase 200V FR-A842-08660-2-60 PDF.
Frequency converter capacity: 0.75KW.
In order to ensure the reliability of production, all production machinery in the design of power with drive, there is a certain amount of surplus.
When the motor can not run under full load, in addition to meet the requirements of power driven,
The surplus torque increases the active power consumption, resulting in the waste of electric energy FR-A842-08660-2-60 PDF.
Speed control method of fan and pump equipment traditional by regulating the entrance or exit of the baffle, valve opening to regulate air flow and water flow
, the input power is large, and a large amount of energy consumption in the baffle, the valve in the process of closure MITSUBISHI Programming Manual.
When using variable frequency control, if the flow rate is reduced, the speed of the pump or fan can be reduced to meet the requirements. Use: power corrd for basic unit FR-A842-08660-2-60 Manual .
Length: 1.0m.
Auxiliary parts for FX3GC and FX3UC MITSUBISHI Programming Manual. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output."MITSUBISHI inverter series: FR-A846.
Voltage level: three phase 400V.
Power: 3.7kw.
SLD converter rated current: 12.6A.
Structure and function: IP55 counterpart MITSUBISHI Programming Manual.
Type: CA.
Substrate coating: have.
Built in DC reactor.
Easy to operate, simple settings.
We have prepared a series of equipment and functions for you to work in any place to meet the life cycle of the product.
Allegedly, the motor power consumption accounted for about half of the total power generated by manufacturing industry consumption.
How to achieve energy efficiency in the plant without affecting the productivity.
Less energy consumption and more output FR-A800 series inverter will help you to have both fish and bear''s paw"
Parameters and frequency settings can be modified in the program.
Inverter control, for example, by the input signal to trigger the operation of the inverter, based on the operation of the inveerter
The status of the signal output, as well as the monitor output and so on, can be customized according to the requirements FR-A842-08660-2-60 Programming Manual.
The control of each machine can be done separately by the frequency converter, and the controol of the dispersion is also carried out FR-A842-08660-2-60 Manual .
Through combining with the real-time clock function can realize the automatic operation (in option FR-LU08). "