MITSUBISHI FR-F540J-0.4K to 15K(F) INSTRUCTION MANUAL (BASIC) PDF

Function extension for connection to special adapters.
DC5V power consumption: 0mA. Display and setting data in a programmable controller.
Can monitor or set the timer, counter, data register FR-F540J-0.4K to 15K(F) PDF.
Half the 16 characters *4, full width of 8 characters, Japanese *4 (JIS first, second), English digital. Connecting cable for handheld RH GOT and PLC.
Cable length: 6 meters.
Application: RS-422 connection and RS-232C connection FR-F540J-0.4K to 15K(F) MITSUBISHI inverter FR-A740 series.
Voltage level: 3 phase 400V.
Frequency converter capacity: 30KW.
FR-A700 converter products are suitable for all kinds of high load requirements of the equipment FR-F540J-0.4K to 15K(F) PDF.
Such as lifting, lift, printing and dyeing, printing and dyeing, material coiling and other general occasions.
High level driving performance.
Unique sensorless vector control mode,
A wide variety of mechanical equipment can be operated at high precision in the super low speed region without the need of the encoder FR-F540J-0.4K to 15K(F) PDF.
With torque control mode,
And in the speed control mode can use the torque limit function.
With vector control function (with encoder),
Frequency converter can achieve position control and fast response, high precision speed coontrol (zero speed control, servo lock, etc MITSUBISHI INSTRUCTION MANUAL FR-F540J-0.4K to 15K(F) Manual. ) and torque control. Power: 15kw.
Voltage: 400V.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost MITSUBISHI INSTRUCTION MANUAL.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving. MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 11KW MITSUBISHI INSTRUCTION MANUAL.
When the inverter is running, the starting current and starting torque of the motor are how?
With the operation of the inverter, with the acceleration of the motor to improve the frequency and voltage,
The starting current is limited to 150% below the rated current (according to the different types of aircraft, 125%~200%).
Starting with power frequency power supply, the starting current is 6~7 times of the rated curreent, therefore, the impact on the mechanical and electrical FR-F540J-0.4K to 15K(F) INSTRUCTION MANUAL.
The inverter drive can be smoothly start (start time longer).
The starting current is 1.2~1.5 times of the rated current, and the starting torque is 70%~120%% rated torque;
For the inverter with the torque automatic enhancement function, the starting torque is more than 100%, which can start with full load FR-F540J-0.4K to 15K(F) Manual.