MITSUBISHI FR-F720P-11K Instruction manual (BASIC) PDF

Power: 11kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity FR-F720P-11K PDF.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor FR-F720P-11K)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Max input / output points: 16 points.
Power supply voltage: 24VDC FR-F720P-11K PDF.
Input points: 8 points.
Output points: 8 points.
Output type: transistor.
Power consumption: 20W.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Cllock function and hour meter function, all of the PLC FX2N has a real-time clock standard FR-F720P-11K Manual .
Continuous scanning function, to define the operation cycle for the application of the continuous scan time FR-F720P-11K PDF.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications MITSUBISHI Instruction manual MITSUBISHI Instruction manual.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to tthe input and output expansion modules and special function modules MITSUBISHI Instruction manual FR-F720P-11K Instruction manual.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FR-F720P-11K Manual .