MITSUBISHI FR-F740-S90K-CHT TECHNICAL MANUAL PDF

MITSUBISHI inverter series: FR-F840.
Voltage level: three phase 400V.
Power: 22.0kw.
SLD converter rated current: 47A.
Structure and function: Standard model FR-F740-S90K-CHT PDF.
Type: CA.
Substrate coating: have.
2 times the power consumption of the wind turbine and pump and the speed of the 3 power consumption is proportional to the speed of the rotating speed.
Through the speed control of the frequency converter to adjust the air flow, can reduce the power consumption FR-F740-S90K-CHT
Give full play to the performance of the motor.
The excitation current is always adjusted to the best state, which can improve the efficiency of the motor FR-F740-S90K-CHT PDF.
Load torque is smalleer, can further improve energy efficiency FR-F740-S90K-CHT Manual .
For example, when a general motor is used, the optimal excitation control mode in the 4% motor load torque is about 30% more than that of the V/F control. Max input / output points: 14 points.
Power supply voltage: DC24V FR-F740-S90K-CHT PDF.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 32.
Weight (kg):0.4.
Size (WxHxD) mm:90x90x75.
FX1N series is a very powerful micro PLC, can be extended to up to 128 I/O points,
And can increase the special function module or the expansion board MITSUBISHI TECHNICAL MANUAL.
Communication and data link function options make FX1N in the volume, communication and special function modules and other important applications is very perfect.
A PLC unit can output 2 100KHz pulses at the same time,
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute position readout, absolute or relative drive, and special pulse output control MITSUBISHI TECHNICAL MANUAL. Power: 15kw.
Voltage: 400V.
There are 100% braking torque output in continuous regeneration, which can ccorrespond to the continuous regeneration operation of the pipeline control FR-F740-S90K-CHT TECHNICAL MANUAL.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive coost MITSUBISHI TECHNICAL MANUAL FR-F740-S90K-CHT Manual .
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving.