MITSUBISHI FR-F740P-1.5K-CHT Instruction manual (BASIC) PDF

MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 55KW.
When the ring is opened, the frequency converter is provided with a load of the motor when the motor is operated with a load at a given frequency,
The range of the motor speed in the rated slip ratio (1%~5%) changes FR-F740P-1.5K-CHT PDF.
For the requirements of relatively high precision, even if the load changes are also required to operate at a given speed of the occasion,
Inverter with PG feedback function can be used (selection) FR-F740P-1.5K-CHT
If the given acceleration time is too short, the output frequency of the inverter is far more than the change of the speed (electric angular frequency),
Converter will be due to flow over the current trip, the operation stopped, which is called stall FR-F740P-1.5K-CHT PDF. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output FR-F740P-1.5K-CHT PDF. Cable flat cable;
Connectorr with 20 pin installed at both ends of the fuse FR-F740P-1.5K-CHT Manual .
Length 1.5M. Can be connected to the models: FX3SA, FX3S, FX3GA, FX3G, FX3GE.
Interface: RJ45 connector.
Weight: 0.02kg.
Can be equipped with the RS-485 communication function of the external equipment MITSUBISHI Instruction manual.
Carrying the RS-485 communication function between the PLC for communication. Series Name: F940WGOT.
System screen display language: english.
Display: 6.7 inch widescreen display.
Display color: 256 color.
Display device: LCD TFF MITSUBISHI Instruction manual.
Resolution: 480 * 234.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (2ch).
Power supply voltage: DC24V.
GOT-F900 series can be easily applied to a variety of different applications.
3 built-in communication channels.
3 standard communication ports are provided for the same PC (COM2:RS-232C) or a PLC (COM1:RS-232C and COM0:RS-422) communication MITSUBISHI Instruction manual.
Flexible layout.
F940WGOT can be installed in a vertical or horizontal direction.
The direction of the screen can be directed by programming software.
Screen arrea FR-F740P-1.5K-CHT Instruction manual.
Through the split screen configuration, you can reduce the operating time.
The image can be divided into two or three parts to display.
According to the user''s application example, the menu screen or the operation of the button sometimes on the screen will often be used to FR-F740P-1.5K-CHT Manual .
As a result, it is very time-consuming and inefficient to make a similar picture every time.