MITSUBISHI FX-16EYT-ESS-TB/UL USER'S GUIDE PDF
Brand: MITSUBISHI
Product model: FX-16EYT-ESS-TB/UL
Name: INPUT AND OUTPUT TERMINAL BLOCKS
Sort:
USER'S GUIDE
File language: English
File size: 0.21MB
Download link: MITSUBISHI FX-16EYT-ESS-TB/UL USER'S GUIDE
Function extension for connection to special adapters.
DC5V power consumption: 0mA. Total points: 30 points.
Input points: 16 points.
Output points: 14 points FX-16EYT-ESS-TB/UL PDF.
Voltage: AC220V.
Output type: transistor.
Outline dimension: 100*75*90.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0 FX-16EYT-ESS-TB/UL
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment. Power: 30kw FX-16EYT-ESS-TB/UL PDF.
Voltage: 200V.
The power factor of the input power factor is up to 0.99 and above (100% load).
CCan be connected to multiple inverters, to achieve a common DC bus mode FX-16EYT-ESS-TB/UL Manual.
Equipped with standard power retrogradation function. Max input / output points: 30 points.
Power supply voltage: 24VDC.
Input points: 16 points FX-16EYT-ESS-TB/UL PDF.
Output points: 14 points.
Output type: relay.
Power consumption (W): 8.
Weight (kg):0.35.
Size (WxHxD) mm:100x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device MITSUBISHI USER'S GUIDE.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O MITSUBISHI USER'S GUIDE.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14 MITSUBISHI USER'S GUIDE FX-16EYT-ESS-TB/UL USER'S GUIDE.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator FX-16EYT-ESS-TB/UL Manual. Function extension board for RS-485 communication.
No DC24V consumption, do not take up input and output.
DC5V power consumption: 0mA. Total points: 30 points.
Input points: 16 points.
Output points: 14 points FX-16EYT-ESS-TB/UL PDF.
Voltage: AC220V.
Output type: transistor.
Outline dimension: 100*75*90.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0 FX-16EYT-ESS-TB/UL
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment. Power: 30kw FX-16EYT-ESS-TB/UL PDF.
Voltage: 200V.
The power factor of the input power factor is up to 0.99 and above (100% load).
CCan be connected to multiple inverters, to achieve a common DC bus mode FX-16EYT-ESS-TB/UL Manual.
Equipped with standard power retrogradation function. Max input / output points: 30 points.
Power supply voltage: 24VDC.
Input points: 16 points FX-16EYT-ESS-TB/UL PDF.
Output points: 14 points.
Output type: relay.
Power consumption (W): 8.
Weight (kg):0.35.
Size (WxHxD) mm:100x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device MITSUBISHI USER'S GUIDE.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O MITSUBISHI USER'S GUIDE.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14 MITSUBISHI USER'S GUIDE FX-16EYT-ESS-TB/UL USER'S GUIDE.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator FX-16EYT-ESS-TB/UL Manual. Function extension board for RS-485 communication.
No DC24V consumption, do not take up input and output.
Last one:
MITSUBISHI FX-16EYS-ES-TB/UL USER'S GUIDE
next one:
MITSUBISHI FX-16EYT-ES-TB/UL USER'S GUIDE
Related products
MITSUBISHI
Terminal module
FX-16EYT-TB
Output points: 16 points.
Transistor output t
MITSUBISHI
Output expansion module
FX-16EYT-ESS-TB/UL
Output: 16 points.
Function: transistor outpu
MITSUBISHI
Output expansion module
FX-16EYT-ES-TB/UL
Output: 16 points.
Function: transistor outpu
MITSUBISHI
Terminal module
FX-16EYT-H-TB
Output points: 16 points.
Transistor output l