MITSUBISHI GT2103-PMBDS2 SAFETY PRECAUTIONS PDF

Cable length: 30.6m.
Long distance connection between CPU (A Series) and GOT for QnAS/AnSCPU/ motion controller.
Long distance connection between A7GT-CNB and GOT GT2103-PMBDS2 PDF.
Applicable models: GT16, GT15, GT11. Protective film for 5.7 inch screen.
Transparent, 5.
Applicable model: GT15. For video input (NTCS/PAL) 4 channels.
Applicable model: GT16. Cable length: 3m.
The connection between the CC-LINK interface unit and the smart GOT GT2103-PMBDS2
Applicable model: HandyGOT. For the GT1695M-XTB.
Applicable model: GT16. USB interface protection cover on the front panel of the host computer (for replacement).
For 15 inches /12 GT2103-PMBDS2 PDF. 1 inches /10.4 inches /8.4 inches.
Applicable model: GT16. With 4.3 inch widescreen.
Surface treatment: transparent.
Protective film color: No.
USB protective cover parts: no openings.
Set number: 5.
Applicable model: GT21. Cable length: 0.7m.
For the connection between the two graphic operations GT2103-PMBDS2 PDF.
Applicable models: GT16, GT15, GT11. For the GT1675M-VTB.
Applicable model: GT16. Cable length: 20m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT10, GT21 MITSUBISHI SAFETY PRECAUTIONS. Features: high cost of second models.
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: AC100~240V.
Specification rich, design at ease
GT23 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface MITSUBISHI SAFETY PRECAUTIONS.
Support log, one to many connections, FA transparent transmission and other diverse FA mmachine related functions GT2103-PMBDS2 Manual .
System configuration diagram shows in order to form the connection with the GOT programmable controller system,
Easily confirm module status. In addition, after touching each module,
Can start its corresponding expansion function, to facilitate system maintenance, shorten the time of failure MITSUBISHI SAFETY PRECAUTIONS.
1, simple design
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration, the use of straight tone of the minimalist design.
2, plane body
Surface mining pure plane design, easy to clean. (USB interface at the back)
3, Ethernet interface
Up to 2 different manufacturers can be connected to the FA machine.
4, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
5, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
6, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
7, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard GT2103-PMBDS2 SAFETY PRECAUTIONS.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
Can be collected through the GOT programmable controller, temperature regulator and other data, and to chart, list display GT2103-PMBDS2 Manual .
Computer analysis can also be used to save the data. Even in the case of a power outage, the log data can be saved to the built-in SRAM.