MITSUBISHI GT2512F-STNA SAFETY PRECAUTIONS PDF

For the QCPU (Q mode) / transport controller CPU (Q Series) bus connection (1 channel) unit standard model.
Applicable models: GT15, GT16, GT27, GT25. Protective film for 10 GT2512F-STNA PDF. 4 inch screen.
Scrub (frame: white), 5.
Applicable model: GT16. Protective film for 5.7 inch screen.
Transparent (frame: white), 5.
Applicable model: GT11. "For the GT1565-VTB.
Applicable model: GT15. "Cable length: 10m GT2512F-STNA
Connection between a connector adapter box and a smart GOT.
Applicable model: HandyGOT. Cable length: 3m.
For connection between QnA/A/FXCPU (D-SUB25 pin connector) and GOT.
Connection between serial communication unit (AJ71QC24-R4) and GOT GT2512F-STNA PDF.
Applicable models: GT10, GT21. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color GT2512F-STNA PDF.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USBB and device USB port MITSUBISHI SAFETY PRECAUTIONS GT2512F-STNA Manual .
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed MITSUBISHI SAFETY PRECAUTIONS.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface MITSUBISHI SAFETY PRECAUTIONS.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water GT2512F-STNA SAFETY PRECAUTIONS.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT2512F-STNA Manual .