MITSUBISHI GT2708-VTBD-GF Connection Manual (Non-Mitsubishi Products 1) PDF

The control cabinet for additional positive CF port (B disk).
Applicable models: GT16, GT15. "A series of high performance models that are widely used in network or single machine work environments GT2708-VTBD-GF PDF.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle) GT2708-VTBD-GF
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB) GT2708-VTBD-GF PDF.
Devicce USB port GT2708-VTBD-GF Manual .
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT2708-VTBD-GF PDF.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly MITSUBISHI Connection Manual. Conversion connector between D-sub 9 pin head and European pin 5 pin MITSUBISHI Connection Manual.
Applicable models: GT11, GT10. Cable length: 0.2m.
Connection between RS-422/485 (connector) and RS-422 cable (D-SUB9 pin) for GT16.
Applicable model: GT16. Protective film for 8.4 inch screen. GT2708-VTBD-GF Connection Manual.
Transparent, 5.
Applicable model: GT12. Cable length: 15m.
For long distance connections between QCPU and GOT (above 13 MITSUBISHI Connection Manual. 2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicablee models: GT16, GT15, GT11, GT27, GT25 GT2708-VTBD-GF Manual . Cable length: 5.0m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11.