MITSUBISHI M60 series PLC Program Development Manual (for personal computer) PDF

MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 22.0kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for linear servo motor M60 series PDF.
Power specification: three phase AC200V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically M60 series
32 segment response level can be set.
Advanced vibration suppression control.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops M60 series PDF.
The automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine. Connector kit for motor power supply; used in
HF-SP121; 201; 301; 202; 352;
502; 2024; 3524; 5024
HF-JP353; 503Must be used whenn using both a computer and an analog monitor output M60 series PDF M60 series Manual. Type: MR-J_B series.
Rated output: 0.2KW.
Interface: standard.
Servo system according to the system structure can be divided into open loop servo system, closed loop servo system, semi closed loop system, compound control system MITSUBISHI PLC Program Development Manual.
The closed loop automatic control system with feedback is composed of a position detecting part, a deviation amplifying part, an executing part and a controlled object.
Servo system must have good controllability, high stability and high adaptability.
Note that the control of the signal is good after the disappearance of the signal, can immediately stop the turn;
High stability is the torque with the increase of speed and uniform decline; adaptability is fast, sensitive, and ring state quality is good MITSUBISHI PLC Program Development Manual.
According to the types of servo drives are classified, there are three kinds of electric, hydraulic or electric hydraulic MITSUBISHI PLC Program Development Manual.
If the servo system is divided according to the function, thenn there is a measuring servo and power servo system;
Analog servo and power servo system; position servo and acceleration servo system M60 series PLC Program Development Manual.
The electric servo system can be divided into two categories: DC DC servo system and AC AC servvo system based on the electrical signals M60 series Manual.
AC AC servo system also has two kinds of asynchronous motor servo system and synchronous motor servo system.