MITSUBISHI MR-J2S-100A4 SUPPLEMENTARY INSTRUCTION MANUAL PDF

Fiber length: 30 meters.
SSCNET III cable (long distance optical fiber, high bending life).
Joints for CN1A and CN1B. Length: 0.3 meters.
Purpose: MR-BT6VCASE MR-J2S-100A4 PDF. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 22.0kw.
Interface type: SSCNET type III fiber communication.
Full closed loop control.
Power specification: three phase AC200V.
High precision and high response location control MR-J2S-100A4
Full closed loop control can be realized by double feedback control method.
Dual feedback control can be performed between the servo motor encoder and the load side encoder.
MR-J3-B-RJ006 can be used in conjunction with a number of manufacturers of linear encoder,
Users can build the system according to their own accuracy requirements MR-J2S-100A4 PDF. ABS type linear encoder using serial interface,
No need to install the battery on the servo amplifier can easily build the absolute position detection system MR-J2S-100A4 PDF.
Flexible system configuration.
Can achieve higher load side positioning accuracy!Drive unit.
MITSUBISHI universal AC servo amplifier MELSERVO-J4 series.
Rated output: 30kw.
Interface: universal type.
Power supply: three phase AC200V.
Support position control, speed control, torque control MITSUBISHI SUPPLEMENTARY INSTRUCTION MANUAL.
Position control to follow the position instructions.
When the control is inserted, the position control is performed.
Speed control follows the speed command to control the speed withhin a certain range MR-J2S-100A4 Manual.
Torque control to follow the torque command to control the stable torque.
Function of switching amplitude MITSUBISHI SUPPLEMENTARY INSTRUCTION MANUAL. The increase in the process of switching and stopping,
And in the operation of the use of the switching signal, switching growth. 1 axis servo amplifier.
MITSUBISHI general AC servo amplifier MELSERVO-J4 series.
Rated output: 12.0kw.
Interface: SSCNET III /H.
Power supply: three phase AC200V MITSUBISHI SUPPLEMENTARY INSTRUCTION MANUAL.
Special specification: full closed loop control 4 wire / device end encoder ABZ phase input corresponding support function security unit, support positioning mode.
Servo amplifier supporting SSCNET III /H.
Complete synchronization system capable of using high speed serial optical communication.
Can be combined with the servo system controller to maximize the performance of the servo system.
The industry''s top level speed motor, the frequency of 2.5kHz amplifier, and optical fiber network extradimensional Symphony orchestra.
Using the traditional two degree of freedom model adaptive control to further opptimize the exclusive high speed servo control structure of the dedicated execution engine MR-J2S-100A4 SUPPLEMENTARY INSTRUCTION MANUAL.
Achieved the fastest 2.5kHz speed frequency response in the industry.
Combined with MITSUBISHI independent research and development of hiigh resolution absolute position encoder (4194304pulses/rev),
Greatly improve the processing speed MR-J2S-100A4 Manual. Can maximize the performance of high-end machinery.