MITSUBISHI Q100UDEHCPU PROGRAMMING Guide Book (Structured Text(ST)) PDF

Input: 2 channels.
50kpps.
Counter input signal: DC5/12/24V.
External input: DC5/12/24V.
Uniform output: Transistor (drain type).
Used to replace the A series of large modules "AD61" Q100UDEHCPU PDF.
40 pin connector.
Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.
High speed counter module for counting high-speed pulse train Q100UDEHCPU
Can be used in combination with the external encoder for positioning and other control.
The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge Q100UDEHCPU PDF.
Each 1 channel is equipped with 2 points of external uniform output.
Can be selected according to the use of "consiistent output function", "continuous comparison function", to achieve high-speed control of external equipment Q100UDEHCPU Manual . (QD64D2)
Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter function,
In order to meet the needs of various applications Q100UDEHCPU PDF. (QD64D2)
The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency) MITSUBISHI PROGRAMMING Guide Book.
Can be in the semiconductor, liquid crystal manufacturing and other high position accuracy requirements of the equipment,
Perform accurate position tracking using high resolution encoders. (QD65PD2)Input and output points: 1024 points.
Input / output data points: 8192 points.
Program capacity: 60k MITSUBISHI PROGRAMMING Guide Book.
Basic command processing speed (LD command) S:0.075.
PLC in the program execution stage: according to the order of the user program order to store the order of each instruction,
After the corresponding operation and processing, the result is written to the output status registerr,
The contents of the output status register are changed with the execution of the program MITSUBISHI PROGRAMMING Guide Book Q100UDEHCPU PROGRAMMING Guide Book.
Output refresh phase: when all instructions are executed,
The output status register is sent to the ooutput latch in the output refresh stage,
And through a certain way (relay, transistor or transistor) output, drive the corresponding output equipment Q100UDEHCPU Manual .