MITSUBISHI Q12PHCPU Programming Manual (SFC) PDF

2 channel.
Input: DC4~20mA (connecting two wire transmitter); DC0~20mA.
Output (resolution): 0~4000. 0~12000.
Conversion speed: 10ms/ channel.
40 pin connector Q12PHCPU PDF.
Isolation between channels.
Power supply to a two wire transmitter.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark Q12PHCPU
Provide support for process control using a general purpose programmable controller.
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output Q12PHCPU PDF.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module Q12PHCPU PDF.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module.FL-net (OPCN-2) Ver.1.00 interface.
10BASE5/10BASE-T use.
Optimal network matching for application purposes and applications,
Seamless communication between different hierarchical systems MITSUBISHI Programming Manual .
Enhancing the ability of information communication through network.
This is also a major task in the field of automation.
Network environment provided by Q series
Is truly open & seamless.
Including based on universal ethernet,
Achieve easy management of the environment "IE Control CC-Link" controller network,
As well as in its managemennt to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network MITSUBISHI Programming Manual Q12PHCPU Manual.
Also including Japan''s first, to achieve the world standard,
And get the SEMI certification of the field network "CC-Link",
And inherited the design concept of the provincial distribution network CC-Link/LT" MITSUBISHI Programming Manual .
And support sensor networks "AnyWire",
To enrich the lineup flexibility to integrate the various layers of automation network.
Easy connection programming tool via ethernet.
Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),
No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.
Therefore, this connection method and the use of USB, can easily communicate with the CPU,
Even the operators are not familiar with the network settings can easily establish a connection.
Real time transmission control data, to improve the production efficiency and the value of the equipment to provide support for the high-speed data communication module. Q12PHCPU Programming Manual .
The high accuracy data that can be synchronized with the sequential scanning to the user program on the PC can be transmitted through the Ethernet.
Realize the previous communication method can not achieve the detailed control of ddata transmission,
Real time data analysis using user applications,
In order to provide support for improving production efficiency and equipment value Q12PHCPU Manual.