OMRON CJ1M-CPU11-ETN INSTRUCTIONS REFERENCE MANUAL PDF

C500-OD I/O Unit Transistor Output 32 pts C500-OD412(3G2A5-OD412).
DC12～48V 0.3A.C500-DA Special I/O Unit Analog Output C500-DA501.
Output: 8 pts.
Specification: 0~+5V, 0~+10V, -5~+5V
-10~+10V, 0~+20mA, 4~+20mA CJ1M-CPU11-ETN PDF. C200H Accessory Interface Unit C200H-IP006Power supply: DC power supply.
Output method: Transistor output sink type.
Inputs points: 24 points.
Outputs points: 16 points CJ1M-CPU11-ETNUnit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming,
I/O communications: 64 nodes;
No CJ1M-CPU11-ETN PDF. of axes: 16 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency CJ1M-CPU11-ETN PDF.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control.
A wide range of position control,
functions are available with,
this position control unit. Model: CPM2A-30CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 18 points OMRON INSTRUCTIONS REFERENCE MANUAL.
Outputs points: 12 points.Unit type: CS1 Special I/O Units.
Product name: Isolated-tyype,
Resistance Thermocouple Input Units CJ1M-CPU11-ETN Manual.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100.
Conversion speed (resolution):
250 ms/4 inputs OMRON INSTRUCTIONS REFERENCE MANUAL.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON INSTRUCTIONS REFERENCE MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CJ1M-CPU11-ETN INSTRUCTIONS REFERENCE MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CJ1M-CPU11-ETN Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.