OMRON CJ2M-CPU15 PROGRAMMING MANUAL PDF

Name: Two-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CJ2M-CPU15 PDF.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CJ2M-CPU15
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Applicable CPU Units: CQM1H-CPU51/61 CJ2M-CPU15 PDF.
Mounting locations/No. of Boards: One in Inner Board slot 2 (right slot).
Pulse inputs: 4 inputs.
Pulse outputs: 2 outputs.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Power supply: DC power supply.
Output method: Transistor output sink type CJ2M-CPU15 PDF.
Inputs points: 12 points.
Outputs points: 8 points.Unit type: CJ1 Basic I/O Units.
Product name: DC Input/Transistor Output Units.
Specifications: Output type, Sinking;
I/O points, 16 inputs, 16 outputs;
Input voltage,Input current,
Maximum switching capacity, 24VDC, 7mA,
12 to 24 VDC, 0 OMRON PROGRAMMING MANUAL. 5 A;
Commons, 16 points, 1 common;
External connection, MIL connector.
No. of words aallocated: 2 words CJ2M-CPU15 Manual.
Current consumption: 5V, 0.13A; 24V, --.
Standards: UC1, N, CE.
A Wide Range of Basic Mixed,
I/O Units for Different Applications,
and Wiring Methods.
One Mixed I/O Unit has connectors for,
both inputs and outputs OMRON PROGRAMMING MANUAL.
Use Mixed I/O Units to easily ,
build space-saving systems. Output method: Transistor sinking.
Inputs: 24.
Outputs: 16.Model : CVM1D-DPL01.
Simplex system also required.Specifications: 16 Kwords without clock.Model : C500-NC112.
1-axis control.Unit classification: CJ1 Special I/O Units OMRON PROGRAMMING MANUAL.
Product name: ProcessInput Units,
(Isolated-type Thermocouple Input Units).
Input points: 2 inputs.
Signal range selection:
Set separately for each input.
Signal range: Thermocouple:
B, E, J, K, L, N, R, S, T, U,
WRe5-26, PLII DC voltage: ±100 mV.
Conversion speed (resolution): Conversion,
speed: 10 ms/2 inputs, Resolution: 1/64,000.
Accuracy at ambient temperature of 25°C:
Standard accuracy: ±0.05% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Cuurrent consumption: 5V, 0 CJ2M-CPU15 PROGRAMMING MANUAL. 18A; 24V, 0.06A.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5V).
A Unit supports four inpuut channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage) CJ2M-CPU15 Manual.
All inputs are isolated.