OMRON CP1L-EL20DT1-D REFERENCE MANUAL (Communications Commands) PDF

Protector for CPU bus connector CV500-COV01Model: CPM2C-24EDT1. Units with 24 I/O points
2 Fujitsu connectors.
Inputs: 16 inputs.
Outputs: 8 outputs.
Input type: 24 VDC CP1L-EL20DT1-D PDF.
Output type: sourcing transistor.Name: CS1D CPU Unit for Duplex CPU Systems.
Specifications: Number of I/O points,
5,120 points (7 Racks);
Program capacity, 60 Ksteps;
Data Memory, 128 Kwords,
(DM: 32 Kwords, EM: 32 Kwords×3banks);
LD execution time, 0 CP1L-EL20DT1-D02 μs;
Duplex CPUs, OK;
Interrupt functions, --.
Current consumption: 5 V system, 0.82A;
26 V system, --.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables CP1L-EL20DT1-D PDF. ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name: ASCII Module.
Model: C200H-ASC31.
Communications port>Port 1: RS-232C(peripheral device connec-tion).
Communications port>Port 2: RS-232C(peripheral device connec-tiModel: C500-BC081(3G2A5-BC081) CP1L-EL20DT1-D PDF.
8 slots(3 linkable slots).
C500-OA I/O Unit Triac Output 24 pts C500-OA223(3G2A5-OA223).
AC250V 1A.Unit type: CS1 Special I/O Units.

Product name: Isolated-type DC Input Unit CP1L-EL20DT1-D Manual.
Input points : 4 inputs.
Signal range: 4 to 20 mA, 0 to 20 mA,
1 to 5 V, 0 to 5 V, ±5 V, 0 to 10 V, ±10 V OMRON REFERENCE MANUAL.
Conversion speed (resolution):
100ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.16A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices OMRON REFERENCE MANUAL.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling OMRON REFERENCE MANUAL.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CP1L-EL20DT1-D REFERENCE MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-EL20DT1-D Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.