OMRON D4F-402-3D INSTRUCTION sheet PDF

Release key type: Special release key.
Indicator: Green.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+2NC/1NO D4F-402-3D PDF.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads D4F-402-3D
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas D4F-402-3D PDF.
IP67 degree of protection. Drive rod: panel mounted ball plunger type.
Closed switch with built-in standard switch, long service life,
10 million times above the high durability of the micro switch to ensure repeatability.
Small limit switch for Chinese market D4F-402-3D PDF.
The panel mounnting plate is the same as the Z- standard switch D4F-402-3D Manual.
Compared with the micro switch, it is more suitable for the application of higher mechanical strength, dust proof and anti drop performance.
Resin molding type terminal.
Certified by UL, CSA and CCC (China standard) OMRON INSTRUCTION sheet. Release Key Type: Special (resin).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @ OMRON INSTRUCTION sheet.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal OMRON INSTRUCTION sheet.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key inseertion point D4F-402-3D INSTRUCTION sheet.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames D4F-402-3D Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors.