OMRON D4N-2C26 INSTRUCTION sheet PDF

Actuator: Shaft.
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving D4N-2C26 PDF.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBB contacts are also available D4N-2C26
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads. Actuator: Arm lever.
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action) D4N-2C26 PDFF D4N-2C26 Manual.
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBB contacts are also available D4N-2C26 PDF.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads. Ratings: 1 A at 125 VAC.
LED indicator: With indicator.
Actuator: Sealed pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector OMRON INSTRUCTION sheet.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) OMRON INSTRUCTION sheet.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Specifications: Outputs, PNP (+ common), 32 outputs.
I/OO connections: MIL connector D4N-2C26 INSTRUCTION sheet.
Rated internal circuit power supply voltage:
Supplied from communications connector.
Rated I/O power supply voltage: 24 VDC OMRON INSTRUCTION sheet.
First Board-type Terminals for Smart Slaves!
Easiily modified to handle an array of I/O interfaces,
and eliminates much on-site wiring D4N-2C26 Manual.
User boards attach easily to the DRT2-@D32BV(-1) using screws.