OMRON D4NL-1DFG-B4 INSTRUCTION sheet PDF

Actuator: Roller plunger.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards D4NL-1DFG-B4 PDF.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement D4NL-1DFG-B4
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only) D4NL-1DFG-B4 PDF.
Certified standards: UL, EN (TÜV), and CCC. Specifications: Outputs;
NPN (- common);
16 points.
I/O connections: MIL connector(Connector with 10-cm cable).
Rated intternal circuit power supply voltage:
Supplied from the communications connector D4NL-1DFG-B4 Manual.
Rated I/O power supply voltage: 24 VDC D4NL-1DFG-B4 PDF.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed pin plunger OMRON INSTRUCTION sheet.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) OMRON INSTRUCTION sheet.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Actuator: Arm lever.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action).
Compact, Plastic-body Safety-door OMRON INSTRUCTION sheet.

Hinge Switch Designed for Saving D4NL-1DFG-B4 INSTRUCTION sheet.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms.
1NC/1NO, and 2NC. Models with MBBB contacts are also available D4NL-1DFG-B4 Manual.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.