OMRON EE-SX975P-C1 INSTRUCTION sheet PDF

Sensing method: Diffuse-reflective.
Connection method: Pre-wired (2 m).
Sensing distance: 5 to 100 mm (wide view).
Model: NPN output .
The Standard for Photoelectric Sensors,
with a Secure Track Record of One,
Million Sold Yearly EE-SX975P-C1 PDF.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
Mechanical axis and optical axis offset of less than ±2 EE-SX975P-C15° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light. Name: Basic Unit(gradient temperature control)(See note 1 EE-SX975P-C1 PDF. ).
Power supply voltage: 24 VDC supplied from the End Unit.
No. of control points: 2.
Control outputs 1 and 2: Voltage output: 2 points (for SSR drive)(See note 2.).
Control outputs 3 and 4: Transistor output: 2 points(sourcing)) EE-SX975P-C1 Manual.
Auxiliary output: None.
Functions: Heater burnout alarm, 2 (See note 3 EE-SX975P-C1 PDF. ); Event inputs, None.
Communications functions: G3ZA connection port,
RS-485 From End Unit, Port A, RS-485.
Input type: Thermocouple, platinum resistance thermometer,
analog voltage, and analog current selectable for each channel.
Terminal: M3 terminal.
Gradient Temperature Control to Achieve OMRON INSTRUCTION sheet.
Consistent Layer Temperature.
Perform gradient temperature control ranging from 2 to 32 channels.
Perform 2-channel gradient temperature control for up to 16,
groups, or 32-channel gradient temperature control for up to 2 groups.
Set gradient temperature control or 2-PID control for each group OMRON INSTRUCTION sheet.
Reduce design work for ladder programming with programless,
connections to Programmable Controllers. (The same feature,
as Standard-control EJ1 Models.).
Connect directly to the G3ZA Multi-channel Power Controller,
using optimum cycle control for high-accuracy control with minimal noise OMRON INSTRUCTION sheet. Appearance: Horizontal type.
Sensing method: Reflective type EE-SX975P-C1 INSTRUCTION sheet.
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Light-ON.
Photomicrosensor with light,
modulation is not influenced by,
external light.
Voltage-output models with wide operating vvoltage,
range (5 to 24 VDC) EE-SX975P-C1 Manual.
Fitted with an easy-to-adjust optical axis mark.
Easy adjustment and optical axis monitoring with,
a light indicator.