OMRON G7TC-OC08 handling manual PDF

Terminal (Wire connection): Screw terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: DC, 12V.
Global standard size, low profile slim G7TC-OC08 PDF.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape G7TC-OC08
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location) G7TC-OC08 PDF.
Screw terminal is also stocked to meet the scrrew type needs G7TC-OC08 Manual.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Slimmest OMRON plug-in SSR with maximum width 6.2 mm.
Long electrical life and high speed switching G7TC-OC08 PDF.
Large plug-in terminals for reliable connection.
G3RV-D (DC load) models can manage resistive loads of 100 µA to 3.0 A.
LED indicator for visible operation checking
Convenient quick electrical connections possible with G3RV push-in models and cross bar connectors OMRON handling manual.
Low power consumption for energy savings.
G3RV is cUL listed when correct relay is matched with the G3RV Socket.Safety outputs *3: Instantaneous, 3(Semiconductor);
OFF-delayed*2, 2 (Semiconductor).
Auxiliary outputs *4: 2(Semiconductor).
Logical AND connection: Inputs, 1(Semiconductor); Outputs, 1(Semiconductor) OMRON handling manual.
No. of input channels: 1 or 2 channels.
Max. OFF-delay time *1: 15 s.
Rated voltage: 24 VDC.
Terminal block type: Screw terminals.
Logical AND Function Adds Flexibility to I/O Expansion.
Facilitates partial or complete control system setup.
Solid-state outputs (excluuding Expansion Units) OMRON handling manual G7TC-OC08 handling manual.
Detailed LED indications enable easy diagnosis.
TÜV SÜD certification for compliance,
with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4).
Approved by UL and CSA.
New unnit joins the Series with the following two additional features:
-OFF-delay time of up to 150 seconds can be set G7TC-OC08 Manual.
-Two logical AND connection inputs.