OMRON H3CR-A8E INSTRUCTION MANUAL PDF

Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT output contacts using a switch H3CR-A8E PDF.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M. Count input: PNP/NPN universal DC voltage input (4.5 to 30 VDC) H3CR-A8E
Display: 7-segment LCD.
Max. revolutions displayed (applicable encoder resolution):
1000 s–1 (1 pulse/rev.), 1000 min–1 (60 pulse/rev.); Black body.
Revolutions displayed up to five digits.
Dual revolution display according to encoder resolution used;
1000 s–1/1000 min–1 or 1000 H3CR-A8E PDF. 0 s–1 /1000.0 min–1,
Switchhable dual revolution display type available (-NV1 models);
extended up to 10000 min–1 H3CR-A8E Manual. Type: H7CX-A Series.
Classification: Preset counter.
Configuration: 1-stage preset counter; Total and preset counter H3CR-A8E PDF.
External connections: Screw terminals.
Settings: 1-stage.
Display digit: 6 digits.
Outputs: Transistor output (SPST).
Power supply voltage: 12 to 24 VDC.
Ultra-compact Counter Provides More,
Complete Functionality.
Basic Features.
Short body with depth of only 59 mm (for 12 to 24-VDC Models with,
Screw Terminals) OMRON INSTRUCTION MANUAL.
Better readability with character height of 12 mm on 4-digit models,
and 10 mm on 6-digit models.
The present value display characters can be switched between red,
green, and orange.
Safety and Reliability.
New set value limit and counter functions have been added OMRON INSTRUCTION MANUAL.
Other Features.
Front Panel can be changed to white or light gray.
New models with two tachometer inputs and two tachometer outputs have,
been added to the series. Supply voltage: 12 VDC.
Control output: Contact output, SPDT (time-limit SPDTT) H3CR-A8E INSTRUCTION MANUAL.
Four-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications OMRON INSTRUCTION MANUAL.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT ooutput contacts using a switch H3CR-A8E Manual.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M.