OMRON H5CN-YDN INSTRUCTION MANUAL PDF

Operating modes: Power OFF Delay.
Supply voltage: 100 to 120 VAC.
Control output: Contact output: SPDT.
H3DK-H: S Series (time range: 0.1 to 12 s).
Set two time ranges with each Timer, from 0 H5CN-YDN PDF. 1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series. Rated supply voltage: 100 to 240 VAC.
Resetting system (See note.): Electric resetting.
Control output: DPDT contact output,
(Time-limit output SPDT and instantaneous output SPDT) H5CN-YDN
Time range: 0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h).
Large Setting Dial and Moving Pointers Ideal,
for Easy Operation and Monitoring H5CN-YDN PDF.
Incorporating an easy-to-see large setting dial with moving pointers.
Wide time-setting range of 0.2 s to 60 h.
(available through three time-range model types).
Wide AC power supply range (100 to 240 VAC).
IP65 watertight and dust-tight front panel.
Approved by UL and CSA.
Conforms to EN61812-11 and IEC60664-1 H5CN-YDN PDF H5CN-YDN Manual.
4 kV for Low Voltage, and EMC Directives.
Conforms to EMC standards.
Six-language instruction manual provided.
Programmable contact enables the building of a self-holding,
relay circuit as well as built-in instantaneous contact. (-NS).
Memory retention (-NSR).
Finger protection terminal block OMRON INSTRUCTION MANUAL.
Enables easy sequence checks through instantaneous outputs.
for a zero set value at any time range. Type: H7CX-A Series.
Classification: Preset counter/Tachometer.
Configuration: 1-stage preset counter, 2-stage preset counter,
Total and preset counter, Batch counter, Dual counter, Twin counter, Tachometer OMRON INSTRUCTION MANUAL.
External connections: Screw terminals.
Settings: 2-stage.
Display digit: 6 digits.
Outputs: Contact output (SPST + SPDT).
Power supply voltage: 12 to 24 VDC/24 VAC.
Ultra-compact Counter Provides More,
Complete Functionality.
Basic Features.
Short body with depth of only 59 mm (for 12 to 24-VDC Models with,
Screw Terminals) OMRON INSTRUCTION MANUAL.
Better readability with character height of 12 mm on 4-ddigit models,
and 10 mm on 6-digit models H5CN-YDN INSTRUCTION MANUAL.
The present value display characters can be switched between red,
green, and orange.
Safety and Reliability.
New set value limit and counter functions have been added.
Other Features.
Front Panel can be changed to white or light gray H5CN-YDN Manual.
New models with two tachometer inputs and two tachometer outputs have,
been added to the series.