OMRON Z-01HD datasheet PDF

Optical system: diffuse type.
Detection distance: 200 positive and negative 50mm.
Beam shape: linear beam.
Beam diameter: 900mm * 100 m.
Resolution: 5 m.
Cable length: 2m. Unit: CPU Units.
Name: LED type without display (See note 1.).
No. of I/O points: 10.
LCD display: NO.
Power supply voltage: 12 to 24 VDC Z-01HD PDF.
Inputs: 6, 12 to 24 VDC.
Outputs: 4, Relays.
Buttons, calendar, and clock: NO Z-01HD
Analog input: Yes.
Even Broader Applications with Increased.
Functionality and Higher Precision.
Increased functionality in a compact body (70 mm wide × 90 mm high).
Easy programming is available using the LCD and operation,
buttons. (See note 1.).
This single Unit easily provides relay, timer, counter, and time,
switch functions Z-01HD PDF.
Expansion is easy with Expansion I/O Units, allowing up to 44,
I/O points. (See note 2.).
Economy-type and Communications-type CPU Units have been,
added to series.
Improved Weekly Timers (See note 1.).
Increased timing accuracy with a monthly deviation of ±15 s,
max. Multiple-day operation and pulse output operation have,
been added.
Select from two power supply options:
100 to 240 VAC or 12 to 24 VDC Z-01HD PDF. Application: 410 × 410 mm.
Power supply: 24 VDC.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths. Application: 410 × 410 mm.
Power supply: Supplied from the Air Clean Unit.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths. Optical system: Diffuse reflective.
Beam shape: Line beam.
Sensing distance: 300±200 mm.
Resolution: 300 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Shape: Screw-shaped.
Dimensions: M18 x 46.3 mm.
Sensing distance: 7 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiecce Displacement Z-01HD datasheet.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit Z-01HD datasheet.
Prevent mutual interference for up to five Units by using a Calculating Unit.