OMRON CJ2H-CPU68 OPERATION MANUAL PDF

Number of inputs: 32 pts.
Input Voltage: 12 V DC.
Input Current: 4 mA.NO. OF I/O SLOTS: 11 SLOTSPower supply: DC power supply.
Output method: Transistor output sink type CJ2H-CPU68 PDF.
Inputs points: 12 points.
Outputs points: 8 points.Specifications: Two RS-422A/485 ports.Unit type: CJ1 CPU Bus Unit.
Product Name: Ethernet Unit.
Specifications:Communications cable,
100Base-TX; Communications functions,
FINS communications service(TCP/IP, UDP/IP),
FTP server functions, socket services,
mail transmission service,
mail reception (remote command receive),
automatic adjustment of PLC''s built-in clock,
server/host name specifications;
nits per CPU Unit: 4 CJ2H-CPU68 PDF CJ2H-CPU68
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.37A; 24V,--.
Standards: UC1, N, L, CE.
Organically Connect the Production,
Site and Management Select the required,
communications services according to,
application needs to flexibly integrate,
PLCs with an Ethernet information network CJ2H-CPU68 PDF. Output method: Analog resolution: 1/6000.
Analog Inputs: 2.
Analog Outputs: 1.Unit type: CJ1 Basic I/O Units.
Product name: Relay Contact Output Units.
Specificationss: Output type , --;
I/O points, 16 inputs;
Maximum switching capacity, 250VAC/24VDC, 2A;
Commons, 16 points, 1 common;
External connection, Removable terminal block OMRON OPERATION MANUAL CJ2H-CPU68 Manual.
No. of words allocated: 1 word.
Current consumption: 5V, 0.11A; 24V, 0.096A max.
Standards: UC1, N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications OMRON OPERATION MANUAL.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput.
CV500-BS CPU Bus Unit BASIC Unit CV500-BSC41 OMRON OPERATION MANUAL.
RS-232C: 2 ports.
Centronics: 1 port.
(w/EEPROM).Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 4 axes.
No. of unit numbbers allocated: 1 CJ2H-CPU68 OPERATION MANUAL.
Current consumption : 5V, 0.36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CJ2H-CPU68 Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.