OMRON CP1E-N40DT-A PROGRAMMING MANUAL (Hardware) PDF

CV500-RT SYSMAC BUS Remote I/O Slave Unit (optical) CV500-RT211.
Light type.Type: Counter inputs, pulse outputs.
12 DC inputs: Yes.
Counter inputs: 2 CP1E-N40DT-A PDF.
Analog inputs: None.
8 transistor outputs: Yes.
2 pulse outputs: No.
2 analog outputs: Yes.Output method: Transistor sinking.
Inputs: ---.
Outputs: 32.Unit type: CJ1 Basic I/O Units.
Product name: Transistor Output Units.
Specifications: Output type, Sinking;
I/O points, 32 outputs;
Maximum switching capacity, 12 to 24VDC, 0 CP1E-N40DT-A5A;
Commons, 16 points, 1 common;
External connection, MIL connector.
No. of words allocated: 2 words.
Current consumption: 5V, 0 CP1E-N40DT-A PDF. 14A; 24V, --.
Standards: UC1, N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system CP1E-N40DT-A PDF.
throughput. Name: CompoBus/S Master Module.
Model: C200HW-SRM21-V1.
Communications protocol: Dedicated CompoBus/S protocol.

CompoBus/S Master Unit
High-speed ON/OFF Bus Saving Wiring Effort and Manufacturing Steps in Factories OMRON PROGRAMMING MANUAAL CP1E-N40DT-A Manual. CV500-ET CPU Bus Unit for Com Ethernet Unit CV Series Only CV500-ETN01.
10BASE-5 type.Inputs: 8.CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 100 VAC CV500-FHD01-EUnit classification: CJ1 Special I/O Units.
Product name: Process Input Units,
(Isolated type Units with Universal Inputs) OMRON PROGRAMMING MANUAL.
Input points: 4 inputs.
Signal range selection:
Set separately for each input.
Signal range:Universal
inputs: Pt100 (3-wire), JPt100 (3-wire),
Pt1000 (3-wire), Pt100 (4-wire), K, J,
T, E, L, U, N, R, S, B, WRe5-26, PL II,
4 to 20 mA, 0 to 20 mA, 1 to 5V, 0 to 1.25V,
0 to 5V, 0 to 10V, ±100 mV selectable range,
-1 OMRON PROGRAMMING MANUAL. 25 to 1.25 V, -5 to 5 V, -10 to 10V,
±10V selectable range, potentiometer.
Conversion speed (resolution): Resolution
(conversion speed): 1/256,000 (conversion cycle:
60 ms/ 4 inputs) 1/64,000 (conversion cycle:
10 ms/4 inputs) 1/16,000 (conversion cycle:
5 ms/4 inputs).
Accuracy at ambient temperature of 25°C:
Standard accuracy: ±0.05% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 CP1E-N40DT-A PROGRAMMING MANUAL. 30A; 24V, --.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5V).
A Unit supports four inpuut channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage) CP1E-N40DT-A Manual.
All inputs are isolated.