OMRON CP1E-N60DT1-D PROGRAMMING MANUAL (Hardware) PDF

Model: CPM2A-60CDR-A. Power supply: AC power supply.
Output type: Relay.
Inputs points: 36 points.
Outputs points: 24 points.Type: CS Special I/O Unit CP1E-N60DT1-D PDF.
Connected ID System: V680 Series; 1 Head.
External power supply: --.
No. of unit numbers used: 1 unit number.
Current consumption: 5V, 0.26A;
24V, 0.13A; External, --.
Communication Unit Dedicated for RFID V680,
Allowing Direct Connection to OMRON PLC CJ/
CS/NJ-series CP1E-N60DT1-D
Communication unit for connecting RFID V680-series,
which can be used around the world, directly to PLC.
Allows batch transfer of data up to 32 kbytes.Unit type: CS1 Special I/O Units CP1E-N60DT1-D PDF.
Product name: Isolated-type,
TThermocouple Input Units CP1E-N60DT1-D Manual.
points Input: 8 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1 CP1E-N60DT1-D PDF.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON PROGRAMMING MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them OMRON PROGRAMMING MANUAL.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CP1E-N60DT1-D PROGRAMMING MANUAL.
High-resolution Models and 8-point Input Models are,
also available OMRON PROGRAMMING MANUAL.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1E-N60DT1-D Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.