OMRON CPM1A-10CDT-A-V1 HOST CONNECTION MANUAL PDF

Power supply: DC power supply.
Output method: Relay output.
Inputs points: 12 points.
Outputs points: 8 points.Name: MIL Connectors.
Specifications: Inputs;
16 inputs ; NPN; -- CPM1A-10CDT-A-V1 PDF.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CPM1A-10CDT-A-V1
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CPM1A-10CDT-A-V1 PDF. Output method: Transistor sourcing.
Inputs: ---.
Outputs: 8.Unit type: CS1 Special analog I/O Units.
Product name: Analog Output Units.
Specifications: I/O points, 4 outputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/4000 ;
Conversion speed, 1 s/point CPM1A-10CDT-A-V1 PDF.
Externa connection, Removable erminal block.
Current consumption: 5V, 0.13A; 26V, 0.18A.
Standards: UC1, N, CE.
For Various Analog I/Os OMRON HOST CONNECTION MANUAL.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Short protection for 10-pin terminal block (package of 10 covers). 12 pts.C500-DA/3G2A5-DA Special I/O Unit Analog Output C500-DA004(3G2A5-DA004) OMRON HOST CONNECTION MANUAL.
Output: 2 pts.
Specification: -10~+10V.Supply voltage: 100 or 230 V AC (selectable), 50/60 Hz.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).Expands G730 output capacity of G730 remote master ; adds 32 or 16 outputs, DIP switch selected OMRON HOST CONNECTION MANUAL. Unit type: CS1 Speciall I/O Units CPM1A-10CDT-A-V1 Manual.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: B, E, J, K, L, N, R, S,
T, U, WRe5-26, PLII, ±100 mV.
Conversion speed: 20 ms/4 inputs,
10 ms/2 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 26V, 0.08A.
Standards: UC1, N, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space coompared,
with previous systems CPM1A-10CDT-A-V1 HOST CONNECTION MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CPM1A-10CDT-A-V1 Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.