OMRON CRT1-AD04 REFERENCE MANUAL PDF

Name: MIL Connectors.
Specifications: Outputs; 16 outputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CRT1-AD04 PDF.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CRT1-AD04
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Size: 35mm CRT1-AD04 PDF.
Type: 4 lines.
Lighting voltage: DC24V.
Color: amber.
Large tactile buttons and uniform lighting to create a general space.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the CRT1-AD04 PDF.
Damping mechanism to ensure high impact resistance.
A slim body with a thickness of 14.66 mm CRT1-AD04 Manual. Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 4 outputs;
Signal range selection:
Set separately for each output OMRON REFERENCE MANUAL.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA; 1/4,00.
Conversion period: 1 ms/point.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.3% of F.S. Current: ±0.5% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 200mA max OMRON REFERENCE MANUAL.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 24V, 0.2*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data OMRON REFERENCE MANUAL.
Analog Output Units for converting binary ,
data into analog output signals.
Connector 24 PIN Crimp Type C500-CE242Unit name: Loop Control Boards.
Specifications: No. of function blocks:
50 blocks max.
Standards: UC1, N, CE.
The open nature of the PLCs is joined,
by integratingg hardware, software,
and networking to meet your needs CRT1-AD04 REFERENCE MANUAL.
Increasing amounts of information,
standardization, and open standards,
form the basis for achieving hardware,
and networking capabilities for process control.
A wide raange of software that can be easily,
used by design, development, and maintenance,
personnel makes operating and maintaining,
the system far easier CRT1-AD04 Manual.