OMRON CS1G-CPU44-V1 OPERATION MANUAL PDF

Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26.4 V.
External connector: Terminal block.
Weight: 180 g max.Includes a Fuzzy Training System Manual,
a Main Unit, a C200H-MR831 Memory Unit,
a C200H-PRO27-E Programming Console,
a C200H-CN222 Cable for the Programming Console,
C500-SU981-E Fuzzy Training Software,
an RS-232C Cable, and a carrying belt CS1G-CPU44-V1 PDF CS1G-CPU44-V1 4 platinum resistance thermometer inputsPower supply: AC power supply.
Output method: Transistor output sink type.
Inputs points: 12 points.
Outputs points: 8 points.ASCII Unit
This program runs independently from the ladder-diagram program in the PLC CS1G-CPU44-V1 PDF.

Name: ASCII Module.
Model: C200H-ASC21.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2: RS-422A/485(peripheral NO. OF I/O SLOTS: 10 SLOTSFeeding unit while the SYSMAC LINK Unit 2
If you need to CS1G-CPUU44-V1 PDF CS1G-CPU44-V1 Manual. Analog outputs : 2 points.
Power supply : built-in power supply
Ranges : -10 to + 10V or 0 to 20mAUnit type: CS1 Basic I/O Units.
Product name: AC Input Unit.
Specifications: 100 to 120 VAC,
16 inputs 100 to 120 VDC, 16 inputs.
Mountable Racks: CPU Rack, CS1W-BC,
@@3,YES, @@2, YES;
C200HX/HG/HE Expansion I/O Rack, No OMRON OPERATION MANUAL.
CS1 Expansion Rack, CS1W-BI,@@3,YES,
@@2, YES; CS1 Long distance Expansion Rack,
Yes; SYSMAC BUS Slave Rack, No.
Words required: (I/O bits: CIO 0000 to CIO 0319), 1 word.
Current consumption: 5V system, 0.11A;
26 V system, --.
Standards: UC1, N, L, CE OMRON OPERATION MANUAL.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control. Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications OMRON OPERATION MANUAL.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 16 axes.
No. of unit numberss allocated: 1 CS1G-CPU44-V1 OPERATION MANUAL.
Current consumption : 5V, 0.36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CS1G-CPU44-V1 Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.