OMRON CV1000-CPU01-EV1 Macro Reference (Cv Support Sortware Version 2: Offline) PDF

C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD003(3G2A5-AD003).
Input: 2 pts.
Specification: 0~+5V.4 platinum resistance thermometer inputs SPACER FOR II101 C500-SP001Model: CPM2A-30CDT1-D CV1000-CPU01-EV1 PDF. Power supply: DC power supply.
Output type: Transistor sourcing.
Inputs points: 18 points.
Outputs points: 12 points.Model: C200H-IA222.
No. of inputs: 16 pts.
Input voltage: 200 to 240 VAC, +10%/–15% CV1000-CPU01-EV1
Input current: 10mA, 200VAC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tioModel: C200H-OD212 CV1000-CPU01-EV1 PDF.
No. of points: 16 pts.
Specifications: 0.3 A, 24 VDC.Model: C500-BC082(3G2A5-BC082).
8 slots(5 linkable slots).
Model: C200H-DA004.
Input points: 8.Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range).
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note) CV1000-CPU01-EV1 PDF. Model: C200H-OC223.
No. of points: 5 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).Number of outputs: 8 pts.
Max. switch-ing capacity: 1.0 A at 24 V DC.
External connector: Terminal block.
Weight: 240 g max.Unit classificcation: CJ1 Special I/O Units OMRON Macro Reference CV1000-CPU01-EV1 Manual.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface:Pulse-train line-driver,
output with Pulse Counter Function;
Number of control axes : 2 axes.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0 OMRON Macro Reference. 27A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speed.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs OMRON Macro Reference.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors. Unit type: CJ1 Basic I/O Units.
name: B7A Interface Units.
Specifications: I/O points, 64 outputs;
External connection, Removable terminal block.
No. of words allocated: 4 words.
Current consumption: 5V, 0.07A; 24V, --.
Standards: UC1, CE.
It transmits 116 points of I/O signals per,
word with a pair of cables CV1000-CPU01-EV1 Macro Reference.
Easy and minimized wiring effort,
The B7A Interface Unit and B7A Link Terminal,
can be used in the same way as a standard,
Basic I/O Unit and I/O Terminal withoutt,
any need to worry about communications CV1000-CPU01-EV1 Manual.
This characteristic reduces the wiring,
when using more than one relatively remote,
sensor or actuator.