Connects SYSMAC LINK Unit, Controller Link Unit to CPU Unit.
For 2 Unit.I/O Control UnitNO. OF I/O SLOTS: 3 SLOTSUnit type: CS1 Special I/O Units.
name: Position control unit CVM1-CPU21-V2 PDF.
Specifications: Control method/Control,
output interface, Open-loop control by,
pulse train output/Open-collector output;
Number of control axes, 4 axis.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0
CVM1-CPU21-V236A; 26V, --.
Standards: U, C, N, L, CE.
High-speed, High-precision,
positioning with 1, 2, or 4 axes.
Versatile functions and superb,
performance enable the construction,
of compact, high-performance machines CVM1-CPU21-V2 PDF.
With its ultra-compact size of 31×90mm,
(W×H),this highly space-efficient Position,
Control Unit(PCU) enables up to 4 axes,
of motor control.Model: C200HW-BI101-V1.
No. of I/O slots: 10 slots.C500-RT SYSMAC BUS Remote I/O Master Slave Wired C500-RT001-PV1.
APF/PCF, With the optical connector 1 CVM1-CPU21-V2 PDF. Model: CPM2C-16ETC. Units with transistor outputs only.
1 Fujitsu connector.
Outputs: 16 outputs.
Input type: 24 VDC CVM1-CPU21-V2 Manual.
Output type: sinking transistor.Name: Two-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON Macro Reference.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON Macro Reference.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model : CV1000-DM151.
Available CV1000/2000/CVM1-CPU21-V2.
128k words.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface OMRON Macro Reference.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No. of axes: 16 axes.
No. of unit numberss allocated: 1 CVM1-CPU21-V2 Macro Reference.
Current consumption : 5V, 0.36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CVM1-CPU21-V2 Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.