OMRON K3HB-PNB-A-DRT1 Communications Manual PDF

Static voltage relay.
K2VR-S/K2VA-S type, high action reliability disk with static type UVR/OVR.
Accurate work through high reliability semiconductor circuits K3HB-PNB-A-DRT1 PDF.
Type K2VU-S1 is the output contact, but will be closed when the voltage is not enough,
Therefore, the locking time sequence circuit of the circuit breaker is not required.
Within the hidden from the start to the 2S timer, can easily adjust the time K3HB-PNB-A-DRT1
The control power of the relay is not needed, which avoids the trouble of wiring.
Measuring voltage: 20 to 200 V AC/DC, 30 to 300 V AC/DC, 60 to 600 V AC/DC.
Supply voltage: 24 VAC/DC.
Ideal for voltage monitoring for industrial K3HB-PNB-A-DRT1 PDF.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resetting and automatically resetting supported by one Relay.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed K3HB-PNB-A-DRT1 PDF.
Process control signal (0 to 10 V) and current splitter input supported.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply. Protect motors and other equipment from unstable,
voltaages in the power supply system OMRON Communications Manual K3HB-PNB-A-DRT1 Manual.
Protect motors and other equipment by detecting,
phase sequence and phase loss for three-phase,
power supplies.
Phase loss detection while the motor is operating.
Global application with power supply range of 200 to 480 V with one Relay.
Greater resistance to inverter noise OMRON Communications Manual.
Width of 17.5 mm to reduce space required in panels.
Push-In Plus Terminal that reduce wiring work.
The use of cage clamps enables wiring with bare stranded wires.
Double-insertion holes for crossover wiring (all terminals).
UL listed for easy shipping to North America.
Certification is pending for LR standards OMRON Communications Manual.
Models added with transistor outputs for superior contact reliability. Input type: DC voltage input type.
Output type: transistor; -; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitabble voltage and current signal simulation, measurement and display, identification of the panel table K3HB-PNB-A-DRT1 Communications Manual.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge forr monitoring the operation trend K3HB-PNB-A-DRT1 Manual.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type system