OMRON ZFV-LTL04 OPERATION MANUAL PDF

Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 3.0A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1 s ZFV-LTL04 PDF.
Ion balance: ±10V max.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual) ZFV-LTL04
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max ZFV-LTL04 PDF.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing).
Weight (Packaged): Approx. 2 kg (Approx. 3 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten ZFV-LTL04 PDF.
Accessories: Instruction sheet, I/O connector, Stand, Streamer.
This ionizer series is designed to go anywhere.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues. A variety of applications can be more convenient and simple to solve the problem
Package must be performed to provide a software package OMRON OPERATION MANUAL.
Intelligent packet ZX-SAM11.
To achieve a variety of workpiece count.
Intelligent packet ZX-SAM13 for detection of small segment difference
The foreign body on the surface of the vibrating object, the joint segment of the eccentric core operatioon is poor, etc OMRON OPERATION MANUAL ZFV-LTL04 Manual. , can be set and extracted by the waveform.
Fiber roller seam detection burr belt of packaging paper tape with segment difference detectionSensor that can be connected: Thermo-Humidity Sensor Head (ZN-THS1__-S) OMRON OPERATION MANUAL.
Display: LCD 7-segment 5-digit 2-step display,
auxiliary information indicator display.
Measurement interval: 10 s, 20 s, 30 s, 1 min, 2 min,
5 min, 10 min, 20 min, 30 min, 1 h.
Calculation function: Instantaneous value, maximum value,
minimum value, average value.
Operating mode: Normal mode, sleep mode.
Recording mode: Continue, ring.
Alarm signal output: Output to photocoupler (External power supply: 12 to 24 VDC,
Load current: Max. 45 mA) Alarm hold setting is possible.
Internal storage device: Internal memory: Approx. 8,500 data items.
External storage device: SD card (to save measured values and to save/read set, values),Recommended SD card: HMC-SD291 (manufactured by OMRON).
Power supply voltage: DC input: 24 VDC±10%, Battery: 2 AAA batteries.
Battery life: Approx. 1 year∗6 (sleep mode, measurement interval of 10 minutes, with 2 AAA nickel metal hydride batteries, with SD card not inserted) ZFV-LTL04 OPERATION MANUAL.
Operating temperature range: 0 to 60°C.
Operating humidity range: 20 to 85% (no condensation).
Weight (packaged): Approx. 500 g.
Accessories: IInstruction Sheet, Startup Guide CD-ROM∗7,
Alarm output connector∗8, DC cable (straight type) ZFV-LTL04 Manual.
Easy temperature and humidity control with an SD Card.