OMRON ZS-MDC11 REFERENCE MANUAL PDF

General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches ZS-MDC11 PDF. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available ZS-MDC11
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard) ZS-MDC11 PDF.
(Ask yoour OMRON representative for information on approved models ZS-MDC11 Manual. )Classification: High-capacity.
Contact gap: E (1.8 mm).
Actuator: Short hinge roller lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy ZS-MDC11 PDF.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available OMRON REFERENCE MANUAL. Optical system: positive and negative radiation.
Detection distance: 20 positive and negative 1mm.
Beam shape: point beam.
Beam diameter: diameter of 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm OMRON REFERENCE MANUAL.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: NPN.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome OMRON REFERENCE MANUAL ZS-MDC11 REFERENCE MANUAL. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr whichever way it is inserted ZS-MDC11 Manual.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.