OMRON ZX-LD100L OPERATION MANUAL PDF

Optical fiber division.
Fiber length: 1 meters.
Allowable bending radius: 30mm above. Item: Special PC Software Wave Inspire RX.
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory ZX-LD100L PDF. Ultra high performance sensors support the core quality of large scale ultra precision measurement.
Measurement center distance of 20 ~ 1500 mm of various models.
Maximum resolution of 0 ZX-LD100L25 mu m.
Maximum response speed of 110 Mu s.
Support parallel output.
Best size / stability.
Sensor size.
Pay attention to the performance of the best sensor head size and 3 point type fixed structure to ensure superior sensing stability ZX-LD100L PDF.
Excellent mobile resolution.
Perspective resolution enhancement.
By improving the sensitivity and resolution of the optical lens,
Optimization of optical system,
Thereby greatly reducing the motion resolution error (due to the location of the workpiece surface caused by the error) ZX-LD100L PDF. Actuator: General purpose; Roller arm lever; AC.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches OMRON OPERATION MANUAL. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types oof actuator are available ZX-LD100L Manual.
Terminals face the front when the cover is removed for,
easy connection OMRON OPERATION MANUAL.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 3 OMRON OPERATION MANUAL. 0A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1 s.
Ion balance: ±10V max.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing) ZX-LD100L OPERATION MANUAL.
Weight (Packaged): Approx. 2 kg (Approx. 3 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, Stand, Streamer.
This ionizer series is designned to go anywhere ZX-LD100L Manual.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues.